How does a sync belt work?

How does a sync belt work?

Synchronous belt drive is composed of an annular belt with equal spacing teeth on the inner surface and a belt wheel with corresponding teeth. When running, the belt teeth and the tooth groove of the belt wheel mesh to transfer motion and power. It is a new type of belt drive that integrates the advantages of belt drive and chain drive gear drive respectively. Note for installation and use of synchronous belt and synchronous wheel: reduce the center distance of the belt wheel, if there is a tension wheel should be loosened first, and then adjust the center distance after installing the belt. For the transmission of fixed center distance, the belt wheel should be removed first, and then the belt wheel is installed on the shaft.

22

23

/

05

The material and type of rubber synchronous belt are introduced

The material and type of rubber synchronous belt are introduced

Rubber synchronous belt with high quality imported neoprene rubber as the main raw material, with a variety of different uses of auxiliary materials; Skeleton material for imported high quality glass fiber rope; The tooth surface is protected by nylon 66 high tensile cloth. It has the characteristics of good dynamic bending, good cracking resistance, excellent ozone resistance, aging resistance, heat resistance, oil resistance, wear resistance and so on. Chloroprene synchronous belt is widely used in textile, automobile, chemical fiber, cigarette, papermaking, printing, chemical machinery and equipment; In recent years, mining metallurgy, iron and steel machinery, medical equipment demand is increasing.

22

23

/

05

What are the advantages of synchronous belt

What are the advantages of synchronous belt

Synchronous belt is a transmission device, in a lot of mechanical equipment is used in this transmission mode, the main reason for the use of a lot of equipment in the transmission is to achieve very good transmission effect, synchronous belt in the transmission also integrated the advantages of other transmission respective.

22

23

/

05

The transmission form and characteristics of rubber synchronous belt are introduced

The transmission form and characteristics of rubber synchronous belt are introduced

The rubber synchronous belt drive is composed of a circular belt with teeth of equal spacing on the inner surface and a corresponding matching wheel. It combines the advantages of belt drive, chain drive and gear drive respectively. When rotating, the power is transmitted through the tooth meshing with the tooth groove of the wheel. Transmission dragon synchronous belt transmission has accurate transmission ratio, no slip, can obtain a constant speed ratio, smooth transmission, can absorb vibration, small noise, transmission ratio range is large, generally up to 1:10. Line speeds of up to 50M/S are allowed, and power transfers range from a few watts to hundreds of kilowatts. High transmission efficiency, generally up to 98%, compact structure, suitable for multi-shaft transmission, no lubrication, no pollution, so it can not be allowed to have pollution and bad working environment under the normal work. Transmission products are widely used in textile, machine tools, tobacco, communication cables, light industry, chemical industry, metallurgy, instrumentation, food, mining, petroleum, automobile and other industries in various types of mechanical transmission.

22

23

/

05

How to prolong the service life of synchronous belt?

How to prolong the service life of synchronous belt?

Synchronous belt operation will directly affect the progress of the whole project, reasonable management and use, can improve engineering efficiency, reduce the use of human resources, in the effective time for the enterprise to create greater benefits. So how to extend the life of the synchronous belt?

22

23

/

05

How does a sync belt work?

How does a sync belt work?

Synchronous belt drive is composed of an annular belt with equal spacing teeth on the inner surface and a belt wheel with corresponding teeth. When running, the belt teeth and the tooth groove of the belt wheel mesh to transfer motion and power. It is a new type of belt drive that integrates the advantages of belt drive and chain drive gear drive respectively. Note for installation and use of synchronous belt and synchronous wheel: reduce the center distance of the belt wheel, if there is a tension wheel should be loosened first, and then adjust the center distance after installing the belt. For the transmission of fixed center distance, the belt wheel should be removed first, and then the belt wheel is installed on the shaft.

22

23

/

05

< 12 >

Zhenshun

Dongguan Zhenshun Electromechanical Co., Ltd

Address: Room 201, Building 2, Transmission Industrial Park, No. 63 Lianhu Road, Xin'an Community, Chang'an Town

QQ：918040428 / 2897307345
Hotline：Shi Huizhen/13929208190
                    Wei Hongtao/13926806557
                    Xu Juhong/15820880576
 

QR
wechat
weibo
qq

Copyright © 2023 Dongguan Zhenshun Electromechanical Co., Ltd

粤ICP备2022065809号

Support：www.300.cn

SAF Coolest v1.2 设置面板QPYSX-ZQMV-FSSQE-AXF

图片ALT信息： Dongguan Zhenshun Electromechanical Co., Ltd
违禁词： 第一，最，一流，领先，独一无二，王者，龙头，领导者，极致，
修改浏览器滑块样式： 4px,4px,#f00
营业执照及SEO链接： Business license

无数据提示

Sorry, there is currently no content in the current column!

You can view other columns or return to Home page

SVG图标库请自行添加图标，用div包起来，并命名使用