News Center

Home page

The transmission form and characteristics of rubber synchronous belt are introduced

Time:

2023-05-22 11:20

Source:

The rubber synchronous belt drive is composed of a circular belt with teeth of equal spacing on the inner surface and a corresponding matching wheel. It combines the advantages of belt drive, chain drive and gear drive respectively. When rotating, the power is transmitted through the tooth meshing with the tooth groove of the wheel. Transmission dragon synchronous belt transmission has accurate transmission ratio, no slip, can obtain a constant speed ratio, smooth transmission, can absorb vibration, small noise, transmission ratio range is large, generally up to 1:10. Line speeds of up to 50M/S are allowed, and power transfers range from a few watts to hundreds of kilowatts. High transmission efficiency, generally up to 98%, compact structure, suitable for multi-shaft transmission, no lubrication, no pollution, so it can not be allowed to have pollution and bad working environment under the normal work. Transmission products are widely used in textile, machine tools, tobacco, communication cables, light industry, chemical industry, metallurgy, instrumentation, food, mining, petroleum, automobile and other industries in various types of mechanical transmission.

Rubber synchronous belt features
(1) Accurate transmission, no sliding when working, with a constant transmission ratio;
(2) Smooth transmission, with buffering, damping capacity, low noise;
(3) High transmission efficiency, up to 0.98, energy saving effect is obvious;
(4) Easy maintenance, no lubrication, low maintenance cost;
(5) The speed ratio range is large, generally up to 10, the linear speed can reach 50m/s, with a large power transmission range, up to several watts to several hundred kilowatts;
(6) Can be used for long-distance transmission, center distance can reach more than 10m.

The main failure mode of rubber synchronous belt drive
(1) Fatigue fracture of belt body;
(2) shear and crushing with teeth;
(3) Belt side, belt teeth wear, cloth stripping;
(4) Bearing layer elongation, pitch increase, the formation of tooth interference, tooth climbing;
(5) Impact and overload make the belt body fracture.

What are the advantages of synchronous belt

How to prolong the service life of synchronous belt?

What are the advantages of synchronous belt

How to prolong the service life of synchronous belt?

Related news

How does a sync belt work?

2023-05-22

Synchronous belt drive is composed of an annular belt with equal spacing teeth on the inner surface and a belt wheel with corresponding teeth. When running, the belt teeth and the tooth groove of the belt wheel mesh to transfer motion and power. It is a new type of belt drive that integrates the advantages of belt drive and chain drive gear drive respectively. Note for installation and use of synchronous belt and synchronous wheel: reduce the center distance of the belt wheel, if there is a tension wheel should be loosened first, and then adjust the center distance after installing the belt. For the transmission of fixed center distance, the belt wheel should be removed first, and then the belt wheel is installed on the shaft.

The material and type of rubber synchronous belt are introduced

2023-05-22

Rubber synchronous belt with high quality imported neoprene rubber as the main raw material, with a variety of different uses of auxiliary materials; Skeleton material for imported high quality glass fiber rope; The tooth surface is protected by nylon 66 high tensile cloth. It has the characteristics of good dynamic bending, good cracking resistance, excellent ozone resistance, aging resistance, heat resistance, oil resistance, wear resistance and so on. Chloroprene synchronous belt is widely used in textile, automobile, chemical fiber, cigarette, papermaking, printing, chemical machinery and equipment; In recent years, mining metallurgy, iron and steel machinery, medical equipment demand is increasing.

What are the advantages of synchronous belt